Patio Table Glass Replacement Installation – Being able to use and install the patio table glass replacement correctly will make your patio table fixed. By doing the replacement process yourself; you can save more money for the other thing. Breaking or cracking the patio table, glass top is not an impossible thing. Some wild party and gathering can be the reason for this disaster. When you get into this trouble, you may think to buy the new one. But with the limited budget, it may be not easy. For you who have a limited budget, you can try to replace the glass by yourself. This way, you can cut the reparation cost easily.
Patio Table Glass Replacement Installation
The first thing which you need to do before starting the patio table glass replacement tips process is preparing a piece of water-resistant plywood. Cut the plywood so that it can fit the tabletop perfectly. Attach it using screws to the table. After that, cut a piece of cement backer board. Simply cut it to fit the plywood. Every 6 inches, screw it to the plywood. Simply lay the tiles on the tabletop. Apply some tile spacers between the tiles. Then, you can arrange the tiles correctly.
After the arrangement, you can remove the tile spacers. Simply draw a line between the tiles by using a pencil. This link will guide you in positioning the tiles. On the tabletop, spread mortar with a notched trowel. Keep it in the one pencil grid row. Next, on the mortar, you can place the tiles with the notches. Place it on the trowel side. You can repeat the steps before until all the additional rows are filled with tiles. When it is completed, let the mortar dry. It may take overnight.
When the mortar is dry, you can remove the tile spacers which are placed between the tiles. Into the spaces between the tiles, push the grout using a grout float. By using the side of the grout float, scrape this grout from the surface of the tiles. For the finishing step, you need to drag the damp sponge, corner along the grout lines. It will create and even depth. Using a wet sponge, wipe the remaining grout from the tile surface. By letting the grout dry overnight, this patio table glass replacement tips DIY process is finished.